› ControlSuite Clients › Equitrac Standalone Clients › Equitrac Clients Overview › Embedded Client for Xerox EIP › MFP configuration › WorkCentre 75xx series › Configure WorkCentre 75xx through the Internet Services Interface

Configure WorkCentre 75xx through the Internet Services Interface

  1. Open a Web browser and enter the URL http://<MFP IP address> in the Address field.
  2. Select the Properties tab, and log in with User ID and Password if prompted. The Extensible Service Setup screen displays:
  3. In the left pane, click the General Setup folder, then select Extensible Service Setup.
  4. Click the Edit button beside the HTTP (SSL) option.
  5. Set the Secure HTTP (SSL) option to Enabled, then click Save.
  6. Click the Edit button beside the Extensible Service Registration option.
  7. Click Enable All, then click Save.

    Ensure that both Authentication & Accounting Configuration and Job Limits are enabled. They are enabled by default. These services must be enabled via the Internet Services interface—not through the physical device.

    If these services are not enabled, errors occur when initializing the Xerox embedded device in Web System Manager, causing the Copy Stop feature to not work.

    Job Limits is not supported on all Xerox devices.
  8. In the Browser Settings section on the Extensible Service Setup page, select the Enable the Extensible Services Browser checkbox. and click Apply.
  9. In the left pane, click the Security folder, then the Authentication subfolder, and then Setup.
  10. On the Xerox Access Setup page, click the Edit button to change the Authentication method.
    If the copier has not been previously configured, you may need to click the Next button (instead of Edit) and then work through a wizard to configure the copier.
  11. On the Authentication, Authorization and Personalization page, do the following:
    1. Select Xerox Secure Access Unified ID System from the Authentication method on the machine’s touch interface list.
    2. Select User Name/Password Validated Locally on the Xerox Machine from the Authentication method on the machine’s web user interface list.
    3. Select Locally on the Xerox Machine from the Authorization information is stored list.
    4. Click Save to apply the changes.
  12. On the Xerox Access Setup page, click the Edit button beside the Xerox Secure Access Setup option under Configuration Setting.
  13. On the Xerox Secure Access Setup page, click the Manually Override Settings button.
  14. On the Manual Override page, set the following:
    1. In the Server Communication section, set the Embedded option to Enabled.
      The Embedded option must be Enabled on Xerox® MFPs running Xerox Extensible Interface Platform® firmware version 1.5 or 2.0 in order for the attached Equitrac card reader to operate normally.
    2. In the Device Log In Methods section, select the preferred method.
    3. In the Accounting Information section, select Automatically apply Account Codes from the server.
  15. Click Save to apply the changes, then click Close.
  16. Click Close again on the Xerox Secure Access Setup page to return to the main Authentication Configuration page.
  17. Click the Edit button beside the Service Registration option.
  18. Select the services you want users to access, then click Save.
  19. In the left pane, click the Security folder, then the Authentication subfolder, and then Tools & Feature Access.
  20. In the Presets section, select the Custom Access option to select the services you want to control access to.
    • Unlocked - the service appears on the control panel and is accessible without authentication.
    • Locked - the service appears on the MPF control panel, but cannot be accessed until the user authenticates.
    • Hidden - the service does not appear on the control panel.
  21. Click Apply to complete the configuration of this MFP.
  22. Log out of the MFP’s configuration utility and close the web browser.