› ControlSuite Clients › Equitrac Standalone Clients › Equitrac Clients Overview › Embedded Client for Xerox ECSP › MFP configuration › ConnectKey enabled MFPs › Configure from the Internet Services Interface

Configure from the Internet Services Interface

  1. Open a Web browser and enter the URL http://<MFP IP address> in the Address field.
  2. Select the Properties tab, and log in with your User ID and Password when prompted.
  3. In the left pane, click General Setup > Extensible Service Setup.
  4. Click Edit beside the Extensible Service Registration option.
  5. Click HTTP to display the HTTP options.
  6. Under Select Force Traffic over SSL, select Yes.Then click Save.
  7. Click Edit beside the Extensible Service Registration option.
  8. Click Enable All, then click Save.
    Ensure that both Authentication & Accounting Configuration and Job Limits are enabled. They are enabled by default. These services must be enabled via the Internet Services interface—not through the physical device. If these services are not enabled, errors occur when initializing the Xerox embedded device in System Manager, causing the Copy Stop feature to not work. Job Limits is not supported on all Xerox devices.
  9. In the left pane, select General > Extensible Services Setup.
  10. In the Browser Settings section on the Extensible Service Setup page, ensure the Enable the Extensible Services Browser check box is selected (it is by default). and click Apply.
  11. In the left pane, click the Security > Authentication, and then Setup.
  12. Click the Edit icon in the Touch and Web User Interfaces title bar.
    1. From the Touch UI Method list, select Xerox Secure Access - Unified ID System.
    2. From the Web UI Method list, select User Name/Password - Validated on the Device.
    3. Click Save to apply the changes.
  13. In the left pane, select Security > Authentication (login) to display the Login Methods screen.
  14. Click the Edit link next to the Xerox Secure Access Setup option.
  15. On the Xerox Secure Access Setup page, click Manually Override Settings.
  16. On the Manual Override screen, set the following:
    1. In the Server Communication section, select the Enabled check box under the Embedded option if you use a standard Equitrac card reader. If you use a generic card reader, clear the check box.
      The Embedded option must be Enabled on Xerox MFPs running ECSP firmware version 1.5 or 2.0 in order for the attached Equitrac card reader to operate normally.
    2. In the Device Log In Methods section, select the preferred method.
    3. In the Accounting Information section, select Automatically apply Accounting Codes from the server.
  17. Click Save to apply the changes, then click Close.
  18. Click Close again on the Xerox Secure Access Setup page to return to the main Authentication Configuration page.
  19. In the left pane, select Services > Service Registration.
  20. Select the services you want users to access, then click Apply.
  21. From the left pane, go to Login/Permission/Accounting > Accounting Method.
  22. From the Accounting Workflow row, click Edit.
  23. Select Capture Usage from the list of any service from which you want to record transactions.
  24. Click Save.