› ControlSuite Clients › Equitrac Clients Overview › Kofax Embedded Client for Xerox EIP › MFP configuration › WorkCentre 56xx series › Configure the WorkCentre 56xx series through the Internet Services Interface

Configure the WorkCentre 56xx series through the Internet Services Interface

  1. Open a Web browser and enter the URL http://<MFP IP address> in the Address field.
  2. Select the Properties tab, and login with User ID and Password if prompted. The Extensible Service Setup screen displays:
  3. In the left pane, click the Security folder, then select Authentication Configuration.
  4. In the Where is the information located section, select Xerox Secure Access from the Device User Interface Authentication list, and the click Next.
    If the MFP device is in Sleep mode, click the Exit Sleep Mode button to wake the device.
  5. Click the Edit button beside the Access Setup Wizard option.
  6. In the Pathway Services section, select the services you want to control access to, then click Save.
  7. In the Installed Services Pathway Access section, select Locked under Services Pathway and click the Finished button to lock everything on the device. To lock only certain features, leave Services Pathway set to Unlocked and click Next. Select the services you want to control access to, then click Save.
    • Unlocked - the service appears on the control panel and is accessible without authentication.
    • Locked - the service appears on the MPF control panel, but cannot be accessed without authentication.
    • Hidden - the service does not appear on the control panel.
  8. Still on the Authentication Configuration page, click the Edit button beside the Device User Interface Authentication option.
  9. Click the Manual Override Settings button at the bottom of the page
  10. Under Device Log In Methods, select the preferred method:
    • Xerox Secure Access Device Only – if you do not want people to use the alternate key board login button to enter their user ID
    • Xerox Secure Access Device + alternate on-screen authentication method – if you want people to also be able to use the alternate key board login button to enter their user ID
  11. Under Accounting Information (Requires Network Accounting), select Automatically apply Accounting Codes from the server. This prevents additional unnecessary authentication prompts.
  12. Click the Save button.
  13. Log out of the MFP’s configuration utility and close the web browser.