Application properties
A DRS application profile for Ricoh PCC specifies connection information for an AutoStore server and a Print Manager server. This information allows a device to use capture and print management services on these servers.
These properties appear in the DRS Details pane when you add or edit a Ricoh PCC application. You cannot change the application type for an existing application.
| Property | Description |
|---|---|
| Name | A name that uniquely identifies an application. |
| Application Type | To create a new Ricoh PCC application in DRS, choose Ricoh SOP for this option. The remaining properties shown here appear after you make this selection. You cannot change the application type after you save a new application profile. |
| Server Configuration |
Select Equitrac. |
| DCE Server Address |
The address for the primary device control engine for Equitrac. This option is only available when Equitrac is selected for Print Manager. Identifies an Equitrac server to be used to print documents. The server type must correspond to the Print Manager setting. This can be an IP address, a system name (if the systems are in the same domain), or a fully qualified domain name. We recommend that you use an IP address only if it is static. |
| DCE Server #2 Address | The address of a second fail safe device control engine for Equitrac. This setting is optional. This option is only available when Equitrac is selected for Print Manager. Identifies an Equitrac server to be used to print documents. The server type must correspond to the Print Manager setting. This can be an IP address, a system name (if the systems are in the same domain), or a fully qualified domain name. We recommend that you use an IP address only if it is static. This property is only displayed if two DCEs are installed. |
| DCE Server #3 Address | The IP address of a third fail safe device control engine for Equitrac. This setting is optional. This option is only available when Equitrac is selected for Print Manager. Identifies an Equitrac server to be used to print documents. The server type must correspond to the Print Manager setting. This can be an IP address, a system name (if the systems are in the same domain), or a fully qualified domain name. We recommend that you use an IP address only if it is static. This property is only displayed if three DCEs are installed. |
| DCE Server #4 Address | The IP address of a fourth fail safe device control engine for Equitrac. This setting is optional. This option is only available when Equitrac is selected for Print Manager. Identifies an Equitrac server to be used to print documents. The server type must correspond to the Print Manager setting. This can be an IP address, a system name (if the systems are in the same domain), or a fully qualified domain name. We recommend that you use an IP address only if it is static. This property is only displayed if four DCEs are installed. |
| Trust Self-Signed Certificate for Equitrac | If you are using a CA certificate, select
False. You must use either all self-signed
certificates or all CA certificates. You cannot combine the two types of
certificates.
|
| Server Certificate Pinning | Select True to bind a certificate to the Equitrac DCE upon connection and use it to validate the trust of subsequent communications with that server. |
| Bypass Button | Select True to allow a user to skip authentication to use the device native functions without logging in or False to remove this option. |
| Authentication | This setting is set to True if the Ricoh PCC is an authentication provider on the device or False if authentication is completed by a third-party provider, such as CAC. |