› ControlSuite Clients › Equitrac Clients Overview › Kofax Embedded Client for Kyocera › User workflows › Authenticate with a magnetic stripe card

Authenticate with a magnetic stripe card

To authenticate with a magnetic stripe card at a Kyocera controlled MFP, do the following:
  1. Insert the card into the guide track with the magnetic stripe facing the indicated direction. Ensure the card is pressed firmly against the guide.
  2. Pull the card down through the guide track and remove the card.
    Do not run the card through at an angle or the terminal will not accept the data.
  3. If the terminal cannot read the entry, the LED flashes red. Reinsert the card into the guide track and run the card through the reader again.
  4. If Secondary prompt is enabled in Web System Manager, and a secondary PIN has been assigned in the database, the user must enter their password on the MFP front panel when prompted. If the user has not been assigned a secondary PIN in the database, they can leave the field blank to proceed.
    If the Secondary prompt is enabled in Web System Manager and the user has PIN 2, the user will not be able to log in with card swipe as the user cannot give the secondary PIN at the authentication.