Application properties

A DRS application profile for Ricoh PCC specifies connection information for an AutoStore server and a Print Manager server. This information allows a device to use capture and print management services on these servers.

These properties appear in the Device Registration Service Details pane when you add or edit a Ricoh PCC application. You cannot change the application type for an existing application.

In an environment with Equitrac and AutoStore deployment, separate applications should be created (one Equitrac application for SFP devices and one Equitrac and AutoStore application for MFPs).

Property Description
Name

A name that uniquely identifies an application.

Application Type

To create a new Ricoh PCC application in DRS, choose Ricoh SOP for this option.

The remaining properties shown here appear after you make this selection. You cannot change the application type after you save a new application profile.

Server Configuration

Select AutoStore and Equitrac.

AutoStore Server Address

Identifies an AutoStore server to be used to capture documents.

This can be an IP address, a system name (if the systems are in the same domain), or a fully qualified domain name. We recommend that you use an IP address only if it is static.

AutoStore Server Port

The port that the AutoStore server uses to communicate with clients.

This setting must match the port number that is set on the Preferences tab of the Ricoh SOP component settings in AutoStore. The default is 3310 (previously 3350).

AutoStore Server Use TLS Select True or False. This setting should reflect your AutoStore server configuration. Verify it in the Preference tab of Unified Client for Ricoh Smart Operation Panel component. By default, the AutoStore setting "Use TLS" is off. If you leave it as off, you should select False in DRS.
DCE Server Address

The address for the primary device control engine for Equitrac.

This option is only available when Equitrac is selected for Print Manager.

Identifies an Equitrac server to be used to print documents. The server type must correspond to the Print Manager setting. This can be an IP address, a system name (if the systems are in the same domain), or a fully qualified domain name. We recommend that you use an IP address only if it is static.

DCE Server #2 Address

The address of a second fail safe device control engine for Equitrac. This setting is optional.

This option is only available when Equitrac is selected for Print Manager.

Identifies an Equitrac server to be used to print documents. The server type must correspond to the Print Manager setting. This can be an IP address, a system name (if the systems are in the same domain), or a fully qualified domain name. We recommend that you use an IP address only if it is static.

This property is only displayed if two DCEs are installed.

DCE Server #3 Address

The IP address of a third fail safe device control engine for Equitrac. This setting is optional.

This option is only available when Equitrac is selected for Print Manager.

Identifies an Equitrac server to be used to print documents. The server type must correspond to the Print Manager setting. This can be an IP address, a system name (if the systems are in the same domain), or a fully qualified domain name. We recommend that you use an IP address only if it is static.

This property is only displayed if three DCEs are installed.

DCE Server #4 Address

The IP address of a fourth fail safe device control engine for Equitrac. This setting is optional.

This option is only available when Equitrac is selected for Print Manager.

Identifies an Equitrac server to be used to print documents. The server type must correspond to the Print Manager setting. This can be an IP address, a system name (if the systems are in the same domain), or a fully qualified domain name. We recommend that you use an IP address only if it is static.

This property is only displayed if four DCEs are installed.

Trust Self-Signed Certificate for DCE If you are using a CA certificate, select False.
You must use either all self-signed certificates or all CA certificates. You cannot combine the two types of certificates.
Server Certificate Pinning Select True to bind a certificate to the Equitrac DCE upon connection and use it to validate the trust of subsequent communications with that server.
Bypass Button Select True to allow a user to skip authentication to use the device native functions without logging in or False to remove this option.
Authentication This setting is set to True if the Ricoh PCC is an authentication provider on the device or False if authentication is completed by a third-party provider, such as CAC.
For the IP address, you can enter IPv4 or IPv6 addresses depending on the configuration of your system. If you enter an IPv6 address, brackets ([ ]) are automatically added to it if missing when you exit from the field.