Set up USB card readers

To set up USB card reader, ensure that Smart cards (USB card reader) are enabled. Log in as System Administrator on device. Go to Tools > Authentication/Security Settings > Authentication > User Details Setup and set Use of Smart Card to Enabled.

Enabling Smart cards is required for every USB card reader, not just Smart Cards. This setting is invisible if the NVM Read/Write values are set according to the Value (reader) column.

USB card readers will not work if the EPA card reader is configured and attached even if the Smart Cards option is enabled.

The maximum number of USB devices that Fuji Xerox MFP handles is two. This means that printing from USB (or any other operation which requires a USB flash drive to be plugged in) is not supported on those devices where there is a built-in card reader and an external USB card reader is also attached.