› ControlSuite Clients › Equitrac Clients Overview › Kofax Embedded Client for Fuji Xerox EIP › Server and MFP configuration › Configure SDR through a web interface › Configure ApeosPort-I, II, and III devices

Configure ApeosPort-I, II, and III devices

To configure ApeosPort-I, II, and III devices, do the following:

  1. Start a web browser, and enter the IP address of the Fuji Xerox device in the Address field.
  2. When prompted, enter your Administration User Name and Password. The Fuji Xerox web configuration page opens (CentreWare Internet Services).
  3. Click the Properties tab, expand the PKI Settings folder in the left pane menu, and then click SSL/TLS Settings. If HTTP-SLL Communication is not Enabled you should enable it. You may need to Generate a Self-Signed Certificate before you can enable SSL.
  4. On the Properties tab, click Auditron Administration in the left menu pane. The Auditron Administration page opens.
  5. Select Remote Access from the Auditron Mode list.
  6. Select Enter Passcode or No Passcode Required from the IC Card Link Mode list. This setting determines whether you want users to enter a passcode (also known on the Equitrac server as the secondary PIN) to access the Equitrac Embedded solution functions. This option will only be available when a card reader is connected.
  7. Click Apply to save the settings.
  8. On the Properties tab, select the Remote Authentication Server/Directory Service folder in the left menu pane and click Authentication System.
  9. Select Authentication Agent from the Authentication System Settings list, and click Apply. If this option is not available you should verify the firmware version and optionally reload the firmware.
  10. Click the Support tab, and Web Application Settings from in the left menu pane.
  11. On the Web Application Settings page, enter the Server Number (for example, number 1), and click Edit.
    If the server number is already used by another application, enter a different available server number, and then click Edit to continue.
  12. On the Web Application Settings page, click Edit beside the Server Number setting. The Web Application Server Settings page opens.
  13. In the URL field, enter http://<NN.NN.NN.NN>:2939/Public/DCE/EIP/joblist.html, where <NN.NN.NN.NN> is the IP address of the Equitrac DCE server.
  14. Click Apply to save your configuration changes.