Welcome > Set up extraction > Classification Locator > Configure by paragraph classification

Configure by paragraph classification

You can use paragraph detection alongside a Classification Locator. However, both the reference project and this project must have paragraph detection enabled.

You can configure paragraph classification for a Classification Locator by following these steps:

  1. Add or open an existing Classification Locator.
  2. Open the locator properties.
  3. Select or update the Referenced project file so that it points to a project configured to perform paragraph detection.
  4. For the Classification Mode select By Paragraph (text only).
  5. Test your locator and adjust the locator, the reference project, and your paragraph detection settings as needed.
  6. When you are happy with the test results, click Close to save your changes.