› ControlSuite Clients › Equitrac Standalone Clients › Equitrac Clients Overview › Embedded Client for Xerox EIP › MFP configuration › Smart card configuration › Configure smart card software through the Internet Services Interface

Configure smart card software through the Internet Services Interface

To enable and configure the Smart Card, do the following:
  1. Open a Web browser and enter the URL http://<MFP IP address> in the Address field.
  2. Select the Properties tab, and log in with User ID and Password if prompted. The Extensible Service Setup screen displays.
  3. In the left pane, click the Security folder, then the Authentication subfolder, and then Setup.
  4. On the Xerox Access Setup page, click the Edit button to change the Authentication method.
  5. On the Authentication, Authorization and Personalization page, do the following:
    1. Select SmartCards from the Authentication method on the machine’s touch interface list.
    2. Select User Name/Password Validated Remotely on the Network from the Alternate authentication method on the machine’s touch interface (Touch UI) list.
    3. Select User Name/Password Validated Locally on the Xerox Machine from the Authentication method on the machine’s web user interface (Web UI) list.
    4. Select Locally on the Xerox Machine (Internal Database) from the Authorization information is stored list.
    5. Click Save to apply the changes.
      A list of configuration settings appears at the bottom of the Xerox Access Setup page. Click Edit to configure any settings that are marked in red text as Required; Not Configured.