› ControlSuite Clients › Equitrac Standalone Clients › Equitrac Clients Overview › Embedded Client for Xerox EIP › MFP configuration › WorkCentre 76xx series › Configure WorkCentre 76xx through the Internet Services Interface

Configure WorkCentre 76xx through the Internet Services Interface

  1. Open a Web browser and enter the URL http://<MFP IP address> in the Address field.
  2. Select the Properties tab, and log in with your Administrator user ID and password when prompted. The Extensible Service Setup screen displays:
  3. In the left pane, click the Security folder, then select Authentication Configuration.
  4. On the Authentication Configuration page, click Edit Methods to change the Authentication method.
    If the copier has not been previously configured, you may need to click the Next button (instead of Edit Methods) and then work through a wizard to configure the copier.
  5. Select Xerox Secure Access from the Device User Interface Authentication list. Leave both Web User Interface Authentication and Authorization options set to Locally on the Device.
  6. Click Save to apply the changes.
  7. On the Authentication Configuration page, click the Edit button beside the Xerox Secure Access option.
  8. Ensure that all services listed are enabled, and then click Save.
  9. On the Authentication Configuration page, click the Edit button beside the Device User Interface Authentication option.
  10. On the Xerox Secure Access Setup page, click the Manually Override Settings button.
  11. Click Manual Override Setting at the bottom of the page.
  12. On the Manual Override page, set the following:
    1. In the Device Log In Methods section, select the preferred method.
      • Xerox Secure Access Device Only – if you do not want people to use the alternate key board login button to enter their user ID
      • Xerox Secure Access Device + alternate on-screen authentication method – if you want people to also be able to use the alternate key board login button to enter their user ID
    2. In the Accounting Information section, select Automatically apply Account Codes from the server.
  13. Click Save to apply the changes, then click Close.
  14. On the Authentication Configuration page, scroll down and click the Edit button beside the Access Setup Wizard option.
  15. In the Device Access page, if you want to lock the front panel of the MFP, set the Services Pathway to Locked and then click Save, otherwise click the Next to continue.
  16. To lock only certain features, leave Services Pathway set to Unlocked and click Next. Select the services you want to control access to, then click Save.
    • Unlocked - the service appears on the control panel and is accessible without authentication.
    • Locked - the service appears on the MPF control panel, but cannot be accessed without authentication.
    • Hidden - the service does not appear on the control panel.
  17. Click Finished on the Feature Access page to complete the configuration of this MFP. The WorkCentre 76xx series device is now configured.
  18. Log out of the MFP’s configuration utility and close the web browser.