Application properties
A DRS Application profile for the Unified Client for Fujifilm specifies connection information for an AutoStore or Equitrac server. This information allows a Fujifilm or Fuji Xerox device to use capture and print management services on these servers.
These properties appear in the DRS Details pane when you add or edit a Unified Client for Fujifilm application.
You cannot change the Application type for an existing Application.
| Property | Description |
|---|---|
| Name |
A name that uniquely identifies an Application. |
| Application Type |
To create a new Unified Client for Fujifilm application in DRS, choose Fujifilm Unified Client for this option. The remaining properties shown here appear after you make this selection. You cannot change the Application type after you save a new Application profile. |
| DWS Server Address |
The host name for the DWS server. It is recommended that you use the use the fully qualified domain name of the server instead of the IP address. If you change the primary DWS server address, in DRS, you must uninstall and deregister the application, change the server host name, and install and configure the application again. |
| DWS Server #2 Address | The IP address of a second DWS server, if available. The Unified Client for Fujifilm application will use this DWS server in case the first DWS server fails or is offline. |
| DWS Server #3 Address | The IP address of a third DWS server, if available. The Unified Client for Fujifilm application will use this DWS server in case the previous DWS servers fail or are offline. |
| DWS Server #4 Address | The IP address of a fourth DWS server, if available. The Unified Client for Fujifilm application will use this DWS server in case the previous DWS servers fail or are offline. |
| Trust Self-signed Certificate for DWS Server | An option to use certificates from a trusted certificate authority or to use self-signed certificates. |
| Server Configuration | Select the type of server configuration for your application:
|
| AutoStore Server Address |
The AutoStore server host name. |
| AutoStore Server TLS Port |
The port that the AutoStore server uses to communicate with the Unified Client for Fujifilm. This setting must match the port number that is set on the Preferences tab of the Fujifilm Unified Client component settings in AutoStore. The default is 3310. |
| AutoStore Server Use TLS |
Select True or False. This setting should reflect your AutoStore Server configuration. Verify it in the Preference tab of Unified Client for Fujifilm component. By default, the AutoStore setting Use TLS is False by default. |
| Trust Self-signed Certificate for AutoStore Server | An option to use certificates from a trusted certificate authority or to use self-signed certificates. |
| DCE Server Address |
The address for the primary device control engine for Equitrac. This option is only available when Equitrac is selected as part of the Server Configuration. Identifies an Equitrac server to be used to print documents. This can be an IP address, a system name (if the systems are in the same domain), or a fully qualified domain name. |
| DCE Server #2 Address |
The address of a second fail safe device control engine for Equitrac. This setting is optional and is only displayed if 2 DCEs are installed. |
| DCE Server #3 Address |
The address of a third fail safe device control engine for Equitrac. This setting is optional and is only displayed if 3 DCEs are installed. |
| DCE Server #4 Address |
The address of a fourth fail safe device control engine for Equitrac. This setting is optional and is only displayed if 4 DCEs are installed. |
| Trust Self-signed Certificate for DCE Server | An option to use certificates from a trusted certificate authority or to use self-signed certificates. |
| Print Manager Address | The IP address or host name of the Output Manager server. |
| Print Manager Port |
The port that the Output Manager server uses to communicate with clients if TLS is not used. This setting must match the port that is set for the Output Manager server. The default setting for Output Manager is 8068. |
| Print Manager Use TLS |
The port that the Output Manager server uses to communicate with clients if TLS is used. This setting must match the port that is set for the Output Manager server. The default setting for Output Manager is 8069. |
| DCE certificate pinning | This option pins a specific DCE that belongs to your configuration for the duration of that configuration. |
| Bypass Button | This option allows users to skip authentication and use the device native functions without logging. This option is not available for an AutoStore only configuration. |
| Authentication | This setting is True if the Unified Client for Fujifilm is an authentication provider on the device or False if authentication is completed by a third-party provider, such as CAC. This field is used for Equitrac or Output Manager. |
| Purge Print Buffer on Logout | When this setting is True, any active print jobs that are in the print queue when a user logs out are removed. The logout process might be slower as a result. |
- For the host name, the Fujifilm device accepts up to 31 characters. If your host name is longer than 31 characters, use the IP address instead.
- For the IP address, you can enter IPv4 or IPv6 addresses depending on the configuration of your system. If you enter an IPv6 address, brackets ([ ]) are automatically added to it if missing when you exit from the field.