› ControlSuite Clients › Unified Clients Overview › Kofax Unified Client for Fujifilm › Deploying the Unified Client for Fujifilm › Use DRS to deploy and configure the unified client

Use DRS to deploy and configure the unified client

DRS is installed as a ControlSuite component. Administrative access to the server is required. The following steps are performed on the server where the installation takes place.
  1. Open DRS. In a web browser, enter http(s)://<DRSServerIP>:9000/ where <DRSServerIP> is the IP address of the server where DRS is installed.
  2. Create an application in DRS:
    1. Select the Applications tab.
    2. Click the New () button at the top left of the Applications pane.
    3. In the Name field (required), enter an application name.
    4. Select Fujifilm Unified Client as the Application Type.
    5. In the DWS Server Address field (required), enter the primary DWS host name. It is recommended that you use the fully qualified domain name of the server instead of the IP address.
    6. If you have additional DWS servers for failover purposes, enter their host names in the DWS Server #2 Address, DWS Server #3 Address, and DWS Server #4 Address fields.
    7. In the DWS Server(s) Port field, enter the port number. The default is 8444.
    8. For Trust Self-signed Certificate for DWS Server, select False to use certificates from a trusted certificate authority or True to use self-signed certificates.
    9. In the Server Configuration list, select one of the following options: AutoStore and Equitrac, AutoStore and Output Manager, Equitrac, Output Manager or AutoStore.
      If your Fujifilm device is a Single-Function Printer (SFP), if you select a configuration with AutoStore, the AutoStore workflows are not shown in the Unified Client Launcher as scanning is not supported.
      Based on the server selection, only some of the following application fields are visible.
    10. If you select AutoStore as part of the configuration, complete the following information:
      • Enter the host name or IP address for the AutoStore Server Address.
      • Enter the AutoStore Server TLS Port number that the AutoStore server uses to communicate with the Unified Client for Fujifilm. By default, the port number is 3310.
      • For AutoStore Server Use TLS, select False if you do not want to use TLS.

      • For Trust Self-signed Certificate for AutoStore Server, select False to use certificates from a trusted certificate authority or True to use self-signed certificates.

    11. If you select Equitrac as part of the configuration, complete the following information:
      • In the DCE Server Address field (required), enter the IP address or host name used by the Equitrac Server.
      • If you have additional DCE servers for failover purposes, enter their IP addresses in the DCE Server #2 Address, DCE Server #3 Address, and DCE Server #4 Address fields.
      • For Trust Self-signed Certificate for DCE Server, select False to use certificates from a trusted certificate authority or True to use self-signed certificates.
      • To use DCE certificate pinning to pin a specific DCE that belongs to your configuration for the duration of that configuration, select True.
    12. If you select Output Manager as part of the configuration, complete the following information:
      • In the Print Manager Address field, enter the IP address or host name used by the Output Manager server.
      • Enter the Print Manager TLS Port number. By default, the port number is 8069.
      • For Print Manager Use TLS, select True or False.
      • For Trust Self-signed Certificate for Print Manager, select False to use certificates from a trusted certificate authority or True to use self-signed certificates.
    13. For Bypass button, select True to allow a user to skip authentication to use the device native functions without logging in or False to remove this option. This option is not available for an AutoStore only configuration.
    14. For Authentication, select True if the Unified Client for Fujifilm is an authentication provider on the device or False if authentication is completed by a third-party provider, such as CAC. This option is not available for an AutoStore only configuration.
    15. If you want to remove any active print jobs that are in the print queue when a user logs out of the Unified Client for Fujifilm, select True for Purge Print Buffer On Logout. This option is only available when the Server Configuration contains Equitrac or Output Manager.
    16. Click Save ().
  3. Add a device in DRS:
    1. Click the Devices tab.
    2. Click the New () button at the top left of the Devices pane. The Add Device function loads into the right pane.
    3. In the Name field (required), enter a name for the Fujifilm device or device group that identifies it on the network.
    4. In the Address field (required), enter the address of the device. While IP addresses can be used, it is preferable to use the fully-qualified domain name.
    5. Enter the Username and Password for the device. Typically, the username is admin.
    6. In the Application list (required), select the application you created in the previous step. The remaining device fields appear.
    7. For Trust Self-signed Certificate for device, select False to use certificates from a trusted certificate authority or True to use self-signed certificates.
    8. To collect client debugging logging files for troubleshooting purposes, set the Enable Debug Log to True.
    9. If you set Authentication to True when you created your application, select the Authentication Screen for users:
      • Welcome (default): The logon prompt appears on a welcome screen that you can customize.
      • Logon: Only the logon prompt appears.
      • Device Home: The home screen for the device appears.

      This option is not available for an AutoStore only configuration.

    10. To change the Welcome Screen Logo, Welcome Screen Image, or Welcome Screen Text, set Customized Assets to True.
      • When the Welcome Screen Logo list or Welcome Screen Image list is displayed, select the image file. If you want to use custom images, they must be in .jpg or .png format, no larger than 1MB or the following dimensions:
        • Welcome Screen Logo: 288 x 72 pixels
        • Welcome Screen Image: 174 x 174 pixels
      • If you want to change the Welcome Screen Text, set the Customize Welcome Screen Text to True. In the Welcome Screen Text field, enter the new text for the Welcome screen. The text cannot exceed 60 characters.
    11. For Customize Workflow Buttons, select True if you want to display the device native apps on the Launcher screen. The Workflow Applications field appears. Choose the available workflow applications for your device.
    12. Click Save () at the top of the Add Device pane.
  4. From the list at the top of the Details pane, select Install and Configure.
    The primary DWS must be online and available when installing the application.
  5. Click Run Action (). This action may take a few moments to complete. Once finished, a Successfully completed message appears in the Action History pane at the bottom of the screen.
    • If you want to change any settings in the application (such as the primary DWS server or server details for Equitrac, Output Manager, or AutoStore), you must use the Uninstall and Delete action to remove the application profile from the device, update the application settings, then choose the Update Configuration action again.
    • If you made any updates to the customized workflow buttons or assets for the Unified Client for Fujifilm, run Update Configuration to push the changes to the device.

    If you add a Device Group in DRS, you can set up multiple devices at the same time with a common configuration. You can also override individual settings per device if you want to group your devices but still have certain settings different. When you run an action at the group level, it will run that command on each of the devices in the group, for a bulk installation. For more information, see Working with Device Groups.