Welcome to Kofax Kapow > Management Console > Management Console Configuration and User Interface > Admin > RoboServers > Configure Cluster Settings

Configure Cluster Settings

The cluster settings are sent to each RoboServer in the cluster. Through the cluster settings one can configure, for instance, which databases are available for robots executing on the RoboServers.


Cluster settings

  1. Right-click a cluster and select Cluster Settings.

    Optionally, in the Settings column, click .

    The Cluster Settings window appears.

  2. Configure the options as needed.
    Note When modifying the cluster settings, any changes are indicated in bold so that one has an overview of the changes made before confirming by clicking OK.
  3. Click OK.

    In order for the settings to be sent to the RoboServers, they must first be applied. Applying settings is done by setting the cluster into maintenance mode (see cluster modes for more information). If the cluster is in maintenance mode, when you click OK, the settings are applied right away. If the cluster is not in maintenance mode, the following window appears:


    Applying cluster settings

  4. In the Action field of the Apply Cluster Settings window, select how you want to transition the cluster into Maintenance mode in order to apply settings.

    When the settings are applied, the cluster returns to Normal mode.