Settings - Advanced tab

The Advanced tab enables you to configure specific features for the system, devices, and clients.

Filter the information that appears on the Advanced tab by entering criteria in the field at the top of each column. For example, to view only properties associated with the mfp.hp.properties namespace, type mfp.hp in the entry field at the top of the Namespace column. Only properties for the mfp.hp.properties namespace appear in the list.

To add a setting, click Create. The Create New Advanced Settings window appears where you define the namespace, property, and value for the setting.

To delete the settings you create, select the box to the left of the setting and click Delete. You cannot delete settings provided with Kofax Front Office Server.

The following table contains all the namespaces and properties listed on the Advanced tab and includes additional detail for property name descriptions that do not fit on the tab. Use these links to go to specific namespaces in the table.

Namespace / Property

Description and Settings

kc.properties

batchname.indexfield

Document class index field used to supply the name of the batch. If the index field is blank, Kofax Front Office Server generates a name. If the batch class contains a batch field with the same name as the index field, the batch field value is used for the batch name instead of the index value. The default is empty.

batchname.kofaxcapture.usedefault

Whether Kofax Capture names the batch based on the settings configured for the batch class.

  • true: Kofax Capture names the batch.

  • false (default): The user manually names the batch.

datetimefield.datetimemacro.ignore

Specify how Kofax Capture destinations expand date macros for date/time fields:

  • true: Macros are not expanded (same behavior as Kofax Front Office Server 3.5).

  • false: Macros are expanded.

kfs.properties

CacheMaxAge

Maximum HTTP content age for static content (such as javascript files), expressed in minutes.

datetimemacro.timezone

Gets the current date depending on TimeZone setting:

  • If the TimeZone is set to 0, use UTC.

  • If the TimeZone is set to 1, use the local time on the server.

DisableCaching

Disables caching of static content.

job.entry.confirmation

Display a confirmation message when the user sends a job with no pages.

  • false (default): Do not display a confirmation.

  • true: Display the confirmation message.

This feature applies to certain devices. See the MFP Administrator's Guide for information.

LockInterval

The interval (in minutes) before a process lock expires. The default is 60 minutes.

Note Do not change this setting unless you are instructed to do so by Technical Support personnel.

ProxyServer

How Kofax Front Office Server identifies itself. In a single server configuration, this value is the server host name. In a clustered configuration, this value is the host name of the cluster proxy or load balancer.

ProxyServerPort

Default http port for communicating with the Kofax Front Office Server. The default is 80.

ProxyServerProtocol

Specifies the protocol for communication with the Kofax Front Office Server when UseProxyServerProtocol is set to true. The value is either:

  • https

  • http

If UseProxyServerProtocol is set to false, this setting is ignored.

ProxyServerSecurePort

Default https port for communicating with the Kofax Front Office Server. The default is 443.

RetryInterval

The interval (in minutes) before the server retries a failed job. The default is 5 minutes.

terminate.sessions.when.password.changed

Terminates all open sessions for a user when that user's password is changed. This provides additional security. It applies to open sessions in the Thin Client and MFPs.

  • false (default): Do not terminate open sessions when the user's password is changed.

  • true: Terminate open sessions when that user's password is changed. The user is prompted to log back in after changing the password.

UseProxyServerProtocol

Select whether the proxy server protocol is determined automatically or set manually.

  • false (default): Have the proxy server protocol determined automatically.

  • true: The proxy server protocol is set manually with the ProxyServerProtocol value. Use this setting if communications between the MFP and proxy server require a different protocol.

kfsportal.properties

allowed.upload.compression.types

Lists allowed data compression types for TIFF files separated with commas. (Example: GROUP4,GROUP3_1D,GROUP3_2D,NONE)

allowed.upload.extensions

Lists allowed file extensions separated with commas. (Example: tiff,jpg,png)

client.alive.notification.interval

The interval (in seconds) at which the Thin Client reports to the server that there is user activity (either mouse clicks or key presses and the server resets the session timeout clock. This value should be shorter than the session timeout value. Values greater than 0, but less than 10, are rounded up to 10 seconds. If this field is left blank or set to 0, the setting is not used.

client.session.timeout

The session timeout (in seconds) for the Administration Console and the Thin Client. If there is no user activity within the specified amount of time, the user session expires. The user must log on again to continue. The default is 1800 (30 minutes).

conf.exchange.domain

Fully qualified domain name where the Microsoft Exchange server is located. Microsoft Exchange user accounts to be associated with Kofax Front Office Server users must be on this domain.

Used by enhanced lookup to search email addresses and fax numbers from Microsoft Exchange Server.

Example where domain.com is the location:

conf.exchange.domain=domain.com.

conf.exchange.server

Microsoft Exchange server host name or IP address.

Example where the host name is exchange:

conf.exchange.server=exchange.

conf.exchange.web.services

Reserved.

conf.exchange.web.service.url

Reserved.

conf.ldap.global.catalog.enabled

Scope of parent and child domains searched for email, fax, and LDAP macros.

  • True: Search in all parent and child domains.

  • False: Search in the current parent domain only.

enable.content.security.policy

Block inline script on the Thin Client.

enables.security.cookie

Set the protocol used for transmitting cookies. This also determines what protocol is used for accessing the Administration Console and Thin Client.

  • true: Configure the Administration Console and Thin Client to use HTTPS only. This enables cookies to be transmitted securely.

  • false (default): Enable the Administration Console and Thin Client to use either HTTP or HTTPS. If cookies are transmitted by HTTP, they might not be secure.

image.zoom.mode

Set the zoom level of the scanned images.

  • 0: Zoom scale 100% (default)

  • 1: Zoom to fit

  • 2: Zoom to width

  • 3: Zoom to height

inbox.refresh.interval

Reserved.

indexfield.maxlinewidth

Reserved.

paging.page.size

Reserved.

restrict.upload.compression.types

Restricts TIFF file uploads to the compression types specified with allowed.upload.compression.types.

  • True: Restrict TIFF file uploads.

  • False: Allow all TIFF files regardless of compression types.

restrict.upload.extensions

Restrict uploads to the files with extensions specified with allowed.upload.extensions.

  • True: Restrict file uploads.

  • False: Allow all files regardless of file extensions.

thumbnail.generator.priority

Reserved.

thumbnail.generator.threads

Reserved.

Licensing

ConcurrentMobileDeviceCleanupFrequency

Frequency in which idle devices are removed, expressed in minutes. The default is 15 minutes.

ConcurrentMobileLicenseDuration

Duration of a concurrent mobile license, expressed in minutes. The default is 15 minutes.

EvaluationEnablesConcurrentMobileLicensing

Whether an evaluation license can mobile devices concurrently. The default is True.

mfp.properties

enable.anonymous.user.cancel.job

Specify whether an anonymous user (someone who uses the Kofax client on the MFP without logging on) can cancel jobs on the device's scan history window. Enter true to enable this feature or false to disable. (Default: false)

failed.job.threshold.min

Amount of time to determine if a job has been failed for MFPs, expressed in minutes.

failed.jobs.polling.interval.ms

Failed jobs polling interval for MFPs in milliseconds

mfp.retry.count

Number of attempts to send images to server before failing. Failed jobs are handled based on the setting of fail.job.after.retry in the mfp.properties namespace. To have the request fail without retries, enter 0. To disable this feature and keep retrying without failing, enter -1 or any negative number. If you switch between a negative number and 0 or higher, restart the client application or MFP to apply the change for how retries are handled. (Default is 5.)

This setting and mfp.retry.interval apply to Canon, Lexmark, Fujitsu, Kyocera, and the MFP Emulator. These settings also apply to Ricoh if the mfp.retry.count setting in the mfp.ricoh.properties namespace is disabled. The HP valid range is (0, 5), if it is > 5, retry will be 5, if it is < 0, retry will be 0.

mfp.retry.interval

Seconds between retries. To retry without delays, enter 0.

mfp.root.category

Specify the categories to appear at the top level of the device screen. Separate top-level categories with a comma (,). Indicate sublevel categories by including the levels above them separated with a slash (/). Use a backslash (\) before special characters such as comma (,) or slash (/) in category name. Example: "A,B/C1\,C2" displays forms and categories of "A" and "C1,C2" (which is a sublevel of B) at the top level.

mfp.canon.properties

mfp.scan.orientation

Set the default orientation. Use "LEF" for long-end first or "SEF" for short-end first. (Default: SEF)

mfp.scan.preview

Enables scan preview mode.

  • true: Turn on scan preview.

  • false (default): Turn off scan preview.

mfp.selectionlist.max

Maximum number of items displayed on the ScanFront device screen.

server.max.job.age.mins

Number of minutes before submitting an incomplete job on ScanFront devices (default = 60).

timeout.scancomplete.mins

Number of minutes the Scan Complete screen remains on screen before sending and exiting automatically (default = 5).

sso.mapped.activedirectory.attributes

Comma-delimited list of Active Directory attributes and values used for Equitrac authentication.

Each item is listed as a key/value pair:

  • The key is an attribute in the Activate Directory schema.

  • The value is a single sign-on parameter, either singleSignOnCanonCN can be used for the full name field in Equitrac or singleSignOnCanonMail for the email address field.

Multiple key/value pairs are separated by commas.

Example: mail=singleSignOnCanonMail,displayName=singleSignOnCanonMail first searches for an Active Directory user with a matching mail attribute. If no match is found, a search is done searches for an Active Directory user with a matching displayName attribute.

mfp.hp.properties

days.to.retain.failed.scan.images

Number of days to retain failed scan images for resend.

mfp.assembly

Assembly values are:

  • true (default): Prompt users to scan more pages.

  • false: Do not display the prompt.

mfp.duplex

Duplex values are:

  • true: Double-sided scanning with the ADF.

  • false (default): Single-sided scanning

mfp.image.preview

Enables image preview mode.

  • true: Turn on image preview.

  • false (default): Turn off image preview.

mfp.password

Password for the MFP user.

mfp.protocol

Protocol used for communication to the MFP from Kofax Front Office Server server:

  • https

  • http (default)

If UseProxyServerProtocol is set to false, this setting is ignored.

mfp.retry.count

Number of attempts to send images to the server before failing. If this setting is invalid (blank, text, or a negative number), the mfp.retry.count setting from mfp.properties is used. The default is 5.

mfp.retry.interval

Minutes between retries (must be a positive value). If this setting is invalid (blank, text, or a negative number), the mfp.retry.interval setting from mfp.properties is used. The default is 5.

mfp.scan.color.mode

The color mode:

  • Color

  • Grayscale (default)

  • B&W

  • Automatic

mfp.scan.continue.job

Display a prompt when a job is complete.

  • True: Display the prompt.

  • False: Do not display the prompt (default).

When prompt is displayed, users can either create a new job or clear all settings and log out.

mfp.scan.crop.setting

Display auto crop options on the MFP front panel:

  • True: Display auto crop options.

  • False: Do not display auto crop options (default).

mfp.scan.file.type

A file type:

  • JPG

  • TIF (default)

mfp.scan.image.adjust.background.cleanup

A background cleanup value between 0 and 8. The default is 0.

mfp.scan.image.adjust.darkness

A darkness value between 0 and 8. The default is 4.

mfp.scan.image.adjust.sharpness

A sharpness value between 0 and 4. The default is 2.

mfp.scan.output.quality

The output quality:

  • Low

  • Medium

  • High

The default is Medium.

mfp.scan.optimize.text.photo

Optimize scanning for based on one of these settings:

  • Text

  • Graphic

  • Mixed0

  • Mixed1

  • Mixed2

  • Mixed3

  • Mixed4

The default is Mixed2.

mfp.scan.page.size

The page size:

  • A3

  • A4

  • A5

  • Exec

  • Government-Legal

  • JB4

  • JB5

  • Ledger

  • Legal

  • Letter (default)

  • Mixed

  • Statement

mfp.scan.resolution

The scan resolution value (as dots per inch or dpi):

  • 75

  • 150

  • 200 (default)

  • 300

  • 400

  • 600

mfp.selectionlist.max

Maximum number of items displayed in a list on the MFP. The default is 50.

server.authmode

The authentication mode:

  • none (Default): After logging on to the MFP device, the system prompts users for their user name and password for personal shortcuts.

  • semi—After logging on to the MFP device, the system prompts users for their password for personal shortcuts. The user name field is already populated.

  • full— At the MFP device, users log in once to use both MFP and Kofax Front Office Server features (single sign on). Kofax Front Office Server obtains the qualified user’s Windows domain name from the MFP as follows: WindowsDomainName\Username.

    • For LDAP authentication at the MFP, enter userPrincipalName in the MFP LDAP field labeled "Retrieve the device user’s email address using attribute of." (The field name may vary based on your MFP model.) Also, ensure that the LDAP attribute userPrincipalName uses the format: username@domain (for example: admin@mydomain.com). This setup and format are required by Kofax Front Office Server to obtain the user’s domain name.

    • For SafeCom authentication at the MFP, ensure that the user’s email address is set at the MFP when the user is authenticated and the domain extracted from the email address is consistent with the user’s Windows domain name in Kofax Front Office Server.

    • For SecureJet authentication at the MFP, ensure that the appropriate domain is specified when you configure the LDAP login and password profile (in the Domain box, under LdapLogin, in SecureJet Admin Software). For SecureJet 6.2, install OXPd before you install SecureJet to avoid a compatibility issue.

server.protocol

Protocol used for communication from the MFP to Kofax Front Office Server server. This is used to generate the server URL when registering the client. The value is either:

  • https

  • http

If UseProxyServerProtocol is set to false, this setting is ignored.

sso.mapped.activedirectory.attributes

An attribute in the Active Directory schema used to search for users. This is used for Equitrac authentication. Example: displayName to match users by the full string name. (Default: sAMAccountName)

mfp.konica_minolta.properties

color.value

The color type:

  • 1: FullColor

  • 2: Black(Bitonal)

  • 4: GrayScale

default.user.auth.option

The default option for Log On Mode 1=No Authentication, 2=Authentication.

enable.image.encryption

Image Transfer Encryption: 1=Enabled, 2=Disabled

ftp.server.address

FTP server name or IP address.

ftp.server.anonymous

FTP Server Anonymous mode: 1=Disabled, 2=Enabled. Note: this setting applies only to communication between the Konica Minolta device and the FTP server.

ftp.server.lock.timeout

FTP lock timeout, expressed in minutes.

We recommend that you do not change the value unless instructed to do so by Technical Support personnel.

ftp.server.passive

FTP Server Passive mode: 1=Disabled, 2=Enabled. Note: this setting applies only to communication between the Konica Minolta device and the FTP server.

ftp.server.password

FTP server password.

ftp.server.port

FTP server port.

ftp.server.proxy

FTP Server Proxy mode: 1=Disabled, 2=Enabled. Note: this setting applies only to communication between the Konica Minolta device and the FTP server.

ftp.server.upload.folder

Location on the FTP server where files will be uploaded from the device. This should be a subdirectory of the home folder for the user specified below.

ftp.server.username

FTP server user.

mfp.scan.page.size

Specify the page size of the document to scan. The default value is LetterLef. Supported values are: A3Sef, A4Sef, A4Lef, A5Sef, A5Lef, A6Sef, B4Sef, B5Sef, B5Lef, B6Sef, LedgerSef, LegalSef, LetterSef, LetterLef, ExecutiveSef, ExecutiveLef, StatementSef, StatementLef, Prc8KSef, Prc16KSef, Prc16KLef, Foolscap, EnvelopeSef, A6CardSef, PostCardSef, EnvelopeLef, A6CardLef, and PostCardLef.

mfp.scan.side

Specify which sides of the page are scanned. The default value is simplex. Supported values are: simplex, duplex, and coverandduplex.

require.user.auth

Requires the user to select Authentication for Log On Mode. 1=Require Authentication, 2=Don't require Authentication.

resolution.value

1=Dpi200x100, 2=Dpi200x200, 3=Dpi300x300, 4=Dpi400x40, 5=Dpi600x600

sso.activedirectory.domain

Domain name associated with authenticated MFP users. Single-sign-on will append a backslash and the user name when authenticating users. If you enter companydomain1 for the sso.activedirectory.domain setting, the complete user name will be companydomain1\username.

webdav.domain

Domain of the WebDAV user.

webdav.server

WebDAV server address.

webdav.path

WebDAV upload location. Leave empty to use the WebDAV root folder.

Note This must refer to a folder that already exists.

webdav.username

User name of the WebDAV user used for authentication.

webdav.password

Password for the WebDAV user used for authentication.

webdav.port

Port number for WebDAV (default = 80).

webdav.protocol

Communications protocol for WebDAV communications, either http or https (default = http).

webdav.trust.all.certificates

Specify whether or not all WebDAV SSL certificates are trusted.

  • true: Trust all certificates.

  • false (default): Only certificates that have been successfully validated are trusted.

imagetransfer.method

Select the transfer method for images, either ftp or webdav (default = webdav).

mfp.kyocera.properties

mfp.scan.preview

Enables scan preview mode.

  • true: Turn on scan preview.

  • false (default): Turn off scan preview.

mfp.selectionlist.max

Maximum number of items displayed on the device screen.

mfp.lexmark.properties

sso.activedirectory.domain

Domain name to be added with a backslash (\) in front of the user name for Single Sign On. (Example: company\username)

mfp.ricoh.properties

inactivity.timeout.auto.send.job

Configure the Kofax client to activate or deactivate the auto-send feature when the device times out for inactivity.

  • true (default): Activate feature and send jobs to the server at timeout.

  • false: Deactivate feature. Jobs are cancelled when the device times out.

job.empty.submit.enabled

Whether or not to allow jobs with no pages to be submitted to the server.

  • true: Allow jobs with no pages to be submitted.

  • false: Do not allow jobs with no pages to be submitted. An error message is displayed to the user (default).

mfp.password

Ricoh client deployer password, which is set to ricoh by default.

mfp.port

Ricoh client deployer port.

mfp.protocol

Ricoh client deployer protocol.

mfp.scan.preview

Enables scan preview mode.

  • true: Turn on scan preview.

  • false (default): Turn off scan preview.

mfp.hide.new.scanned.pages.on.first.scan

Hide or show New Pages Scanned information until the user clicks Add New Pages. Set to true to hide the information or false (default) for it to remain visible.

mfp.retry.count

Number of attempts to send images to server before failing without requeuing. When this happens, an error appears, and the job is deleted. If you want to requeue a failed job instead of deleting it, disable this property and use mfp.retry.count in the mfp.properties namespace instead by entering -1.

To disable retries, enter 0. To keep retrying without failing, enter any negative number except -1. (Default is -1)

mfp.retry.interval

Seconds between retries. To retry without delays, enter 0. If mfp.retry.count for Ricoh is disabled, the setting for mfp.retry.interval in the mfp.properties namespace is used instead.

sso.mapped.activedirectory.attributes

Domain name associated with authenticated MFP users. Single-sign-on will append a backslash and the user name when authenticating users. If you enter companydomain1 for the sso.activedirectory.domain setting, the complete user name will be companydomain1\username.

mfp.xerox.properties

http.scan.enabled

Enable Xerox HTTP(s) Scanning.

  • true: Use Xerox HTTP(s) Scanning

  • false: Use Xerox FTP Scanning

mfp.inactivity.timeout.seconds

Number of seconds of inactivity that elapse before automatic log off.

mfp.scan.color.mode

BLACK_AND_WHITE, GRAYSCALE, FULL_COLOR, default=BLACK_AND_WHITE

Note: for file type XSM_TIFF_V6 only BLACK_AND_WHITE is allowed, for file type JFIF_JPEG only GRAYSCALE or FULL_COLOR is allowed.

mfp.scan.compression.quality

CompressionQuality=0-255 (0 lowest quality, 255 highest quality), default=127.

mfp.scan.contrast

-100 - 100, Default=0(depends on Document image mode and Darkness).

mfp.scan.darkness

-100 - 100, Default=0.

mfp.scan.file.type

File type values are XSM_TIFF_V6, JFIF_JPEG. The default is XSM_TIFF_V6.

mfp.scan.image.mode

TEXT|PHOTO|MIXED|MAGAZINE|HALFTONE, default=MIXED.

mfp.scan.orientation

PORTRAIT|LANDSCAPE, default is PORTRAIT.

mfp.scan.preview

Enables scan preview mode.

  • true: Turn on scan preview.

  • false (default): Turn off scan preview.

mfp.scan.resolution

Resolution values (as dots per inch or DPI):

RES_72X72, RES_100X100, RES_200X100, RES_100X200, RES_200X200, RES_300X300, RES_400X400, RES_600X600.

mfp.scan.sharpness

-100 - 100, Default=0 (depends on Document image mode).

mfp.scan.sides

ONE_SIDED|TWO_SIDED default is ONE_SIDED.

template.max.chars.per.metadata.entry

Index field value strings longer than this value are written in multiple parts as separate metadata items to avoid very long strings in metadata. The maximum value depends on the device model. Default = 100.

server.max.job.age.mins

Number of minutes before an incomplete job is flagged as failed (default = 60).

sso.mapped.activedirectory.attributes

An attribute in the Active Directory schema used to search for users. This is used for Equitrac authentication. Example: displayName to match users by the full string name. (Default: sAMAccountName)

shared_resources.properties

cached.scan.job.lifetime.seconds

Reserved.

db.failover.retry.count

Reserved.

db.failover.retry.interval

Reserved.

email.smtp.timeout.millis

Email SMTP destination type timeout, expressed in milliseconds. The minimum value is 100000 milliseconds (1 minute and 40 seconds) and the default value is 1200000 milliseconds (20 minutes).

filesys.min.retries

Minimum number of times to retry, regardless of timeout.

filesys.retry.timeout.millis

Timeout period before stopping retries.

filesys.retry.wait.millis

Time to wait between retries.

kfs.db.failover.retry.count

Reserved.

kfs.db.failover.retry.interval

Reserved.

kfs.scanjob.db.failover.retry.count

Reserved.

kfs.scanjob.db.ignored.error.codes

Reserved.

max.cached.scan.jobs

Reserved.

scanjob.server.retry.frequency

Reserved.

SMTPNotification

Kofax.SMTP.Timeout

Email notification timeout, expressed in seconds.

system.resource.checker.properties

accept.requests.on.disk.check.error

Whether or not requests should be accepted if disk space check fails.

If no value is specified, the default "true" is used.

Values: true, false

check.frequency.millis

How often to check available disk space in milliseconds.

If no value is specified, the default 60000 is used.

enabled

Whether or not the filter is enabled.

limits

Minimum limits for available disk space, and the paths to check. There is no default setting for this property.

Format:

<size>@<path>;<size>@<path>;

where

<size> is nK (kilobytes), nM (megabytes), or nG (gigabytes)

<path> is a system file path or {SharedStorage}

You can add multiple size/path pairs separated by a semicolon. Requests are blocked if any of the drives falls below the specified limit. If you only specify /, the drive where Kofax Front Office Server is installed is checked.

The path can be a UNC path, for example 10G@//another server/scanjobs.

Example:

limits=100M@C:/;1G@D:/;50M@ {SharedStorage}

Requests are blocked if drive C falls below 100 MB free space, drive D falls below 1 GB free space, and the drive where the workdir is located falls below 50 MB.

vrs-default.properties

AdvancedClarity

Applies only when ColorMode=3 (black/white). Applies advanced thresholding techniques for suppressing densely patterned document backgrounds.

AdvancedClarityPerf

Applies only when ColorMode=3 (black/white). Specifies the trade off between execution speed and image quality for the Advanced Clarity algorithm.

Range 1-5

1 = fastest execution speed and a good quality image.

5 = slowest execution speed and best image quality.

AutoBrightness

Have VRS automatically assign the optimal value for the brightness of the image. 0=off, 1=on

BarAlg

Applies only when BarEnable=1. Specifies which bar code reader to use.

0=None, 1=Standard, 2=advanced

BarEnable

Enables or disables the bar code reading feature. 0=Disable, 1=Enable

BarHeight

Applies only when BarEnable=1. Specifies the height in hundredths of an inch of the bars in a bar code. Should be set to the physical height of the bar code. Range: 0.15 -1.25.

BarMaxPerLine

Specifies the maximum number of bar codes to search for on a horizontal search path. Range: 1-64.

BarSearchDirection

Specifies the orientations for the bar codes on an image, and controls the search directions to use to read bar codes. Applies only when BarEnable=1. Values: 1=0 degrees, 2=90 degrees, 4=180 degrees, 8=270 degrees

BarType

Applies only when BarEnable=1. Specifies the types of bar codes to search for on an image. You can add values together to specify two or more bar code types.

Note Search for the smallest set of bar codes you need. Searching for a large range of bar codes may affect performance.

0=None

1=Code 39 (3 of 9)

2=Interleaved 2 of 5

4=Code 128

8=EAN

16=UPC-A

32=UPC-E

64=Codabar

128=Code 93

256=Postnet

512=Linear 2 of 5

1024=Aztek

2048=PDF417

4096=Data Matrix

8192=MaxiCode

16384=QR Code

BlackBG

The color of the scanner's background. 0=white 1=black

BrightnessAggr

Used in conjunction with AutoBrightness. A higher value of BrightnessAggr increases the brightness of the black and white image output. Range: 0-100

BWBrightness

Specifies the intensity of the output black and white image. Applies only when all of the following conditions exist: VRS is returning a black and white image, the input image is grayscale or color, AutoBrightness=0, and AdvancedClarity=0. The default value of 128 is neutral. Range: 0–255

BWContrast

Applies only when VRS is returning a black and white image and the input image is grayscale or color. The amount of difference between the lightest and darkest areas on an image. Range: 0-255

ColorBrightness

Specifies the intensity of the output color image. Applies only when VRS is returning a color image and the input image is color. Default value 128 is neutral. Range: 0–255

ColorContrast

Applies only when VRS is returning a color image and the input image is color. Similar to BWContrast, but the input image is color. Range: 0-255

ColorDetect

Have VRS evaluate each image to determine whether or not it should be processed as a color or black and white image. 0=off, 1=on

ColorGamma

Applies only when ColorMode=3 or ColorMode=1, and the input image is color. Used in VRS to compensate for scanners whose built-in gamma value leads to lower quality images. Range: 0-255

DropBGColorForBitonalFG

Applies only when ColorDetect=1. Have VRS ignore the color background of a document that is otherwise black and white. 0=off, 1=on

EdgeAggr

Fine-tuning parameter for the edge detection algorithm. Range: 0-255

GrayContrast

Applies only when the input image is grayscale. This setting is Similar to ColorGamma, but for grayscale input images. The default value of 128 is neutral. Range: 0-255

GrayGamma

Applies only when ColorMode=3 and the input image is grayscale. Similar to ColorGamma, but for grayscale input images. Range: 0-255

Performance

CMISDestinationXmlConfig

Identifies the path to CMIS-compliant repository destinations that are located on cloud services, authentication URLs, and ClientIDs and ClientSecrets.

You can do the following:

  • Edit the content directly in the value field

  • Download content to edit in another application

  • Upload the edited file or upload a different xml file

In a network that has intermittent or low bandwidth issues, you can modify the <RequestTimeoutSeconds> entry to help alleviate the problem.

EmailNotificationThreads

Number of threads for sending email notifications. To apply the number of processors on the server, set the value to 0. If you change the value, it goes into effect the next time the server is started.

FaxThreads

Number of threads for fax processing. To apply the number of processors on the server, set the value to 0. If you change the value, it goes into effect the next time the server is started.

JobProcessingThreads

Number of threads for processing jobs. To apply the number of processors on the server, set the value to 0. If you change the value, it goes into effect the next time the server is started.

KofaxCaptureExportThreads

Number of threads for exporting to Kofax Capture.To apply the number of processors on the server, set the value to 0. If you change the value, it goes into effect the next time the server is started.

KofaxCaptureRestartInterval

Number of hours between each attempt to restart Kofax Capture. To disable, set the value to 0.

KofaxCaptureScriptingThreads

Number of threads for processing Kofax Capture validation scripts. To apply the number of processors on the server, set the value to 0. If you change the value, it goes into effect the next time the server is started.

PdfThreads

Number of threads for PDF processing. To apply the number of processors on the server, set the value to 0. If you change the value, it goes into effect the next time the server is started.

VrsThreads

Number of threads for VRS processing. To apply the number of processors on the server, set the value to 0. If you change the value, it goes into effect the next time the server is started.

Reporting

ReportingWSAUrl

Centrally available URL used for reporting. If you are deploying Local Clients, set the value to the Kofax Reporting WSA Sender URL. The Kofax Front Office Server Local Client uses the URL to locate the database for reporting data.