Activating connector profiles

To make connector profiles available at a device, you activate the connectors and then select the connector profiles. Each connector profile that is activated on a device is represented by a separate button on the ShareScan Client screen.

1. In the Administration Console, select the Devices tab. The Device configuration pane displays a list of the available devices and device groups.
2. Select the device or device group on which you want to activate the connector. The Configure connectors for device and the Settings panes open. The Configure connectors for device pane has the following columns:
   • Select profiles: Select a default connector from the list.
   • Display name: Displays connector's name.
   • Configured: Choose Yes or No.
   • Layout: Numbers in order of selecting.
3. In the Select profiles column, select the connector profile that you want to activate. You can only select configured profiles which appear in black. Profiles that are not configured appear in red. Only the connectors that have valid licenses for the selected device will appear.
4. Click OK and then click Save.
5. Click the Layout button. The Arrange layout window opens with the following settings:
   • Connector
   • Profile
   • Display name
   • Order of appearance
6. Drag and drop the profiles to re-arrange the order of appearance of the connector buttons at the client and click OK.
7. Click Save. The profile is now activated on the device. Note that the web-browser enabled MFP devices and the simulator there may experience a minor delay (typically less than 30 seconds) until the new connector settings and connector associations are propagated.