Scan/VRS profiles
Use Scan/VRS profiles to store common scanner, normalization, binarization, conversion and image perfection settings for reuse. You can also configure advanced eVRS settings to further enhance the image quality, which includes cropping, de-skewing, de-speckling, advanced binarization and more.
TotalAgility provides a default Scan/VRS profile. You can edit the default profile or create additional profiles. You can associate a Scan/VRS profile with a capture-enabled process or use it in scan interfaces, on phone devices, in upload scenarios and more.
Interaction of Scan/VRS profiles and Web Capture service with VRS Elite
When scanning from a VRS Elite Twain-On-Top source, image processing is disabled in TotalAgility, as VRS Elite handles it. Therefore, image processing must be configured through VRS Elite. VRS Elite then performs image processing before passing the image to TotalAgility.
If a Scan/VRS profile is configured, the same name is used to auto-select a VRS Elite profile. See System Settings module > Configure the settings for the system > Forms for additional information.
Using Scan/VRS profile for MFP scanning
A Scan/VRS Profile can serve two purposes when it comes to MFP scanning.
-
It can be used to push “Scan Settings” to MFP, so that the MFP scan engine uses the specified scan settings. This includes settings like:
-
Color mode (e.g. scan in color, grayscale, or black and white)
-
Resolution
-
Page Size
-
Page Orientation
-
Simplex/Duplex
-
Page Source (ADF or Flatbed)
So when an MFP performs scanning, it configures its scan engine to use the corresponding settings.
-
-
It can be used to indicate “Image Processing Settings”, so that when an image is received by TotalAgility from the MFP, it will use eVRS to perform the indicated image processing. This includes settings like:
-
Output color
-
Output resolution
-
Auto Rotate
-
Auto Crop
-
Blank Page Deletion
-
Deskew
-
Despeckle
-
eVRS command strings
-
See also: